Skip to content

EBSN Bilge Switches

$152.46$189.97

Description

The Quick EBSN Bilge switch is an electronic switch that allows the bilge pump to be operated in the presence of water. This easy to install unit is composed of a resin-coated watertight casing with operation managed by a microcontroller. It has an advanced digital filter to distinguish the presence of water and an extended power supply range too. This unit has the option of being installed with a remote indication of operation status by led or remote control pane which will offer a signal if the bilge pump is on for a prolonged period of time, or a manual remote pump switch-on by button or remote control panel. There is a switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. The EBSN has the ability to function over a wide range of environmental temperatures and is protected against excessive battery rundown. This unit is sold complete with the bilge switch and user manual.

Models

EBSN 10 EBSN 15 EBSN 20
Current carrying capacity of the relay contacts (Max) 10 A 15 A 20 A
Supply voltage (1) 9 · 31 Vdc
Current absorbed when idling 7.5 mA (Typical value)
Operating Temperature from – 15 to + 71°C
Degree of protection IP 68
Switch-on delay 5 sec
Switch-off delay 20 sec
Casing Material Nylon
Dimensions W x H x D – inch 75 x 83 x 38 mm
231/32 x 3″ 1/4 x 11/2
Weight – lb 415 g
0,91 lb

 

Additional information

Weight N/A
Dimensions 1 × 1 × 1 in
AMPS

10A, 15A, 20A

Specifications

Models
EBSN 10 EBSN 15 EBSN 20
Current   carrying capacity of the relay contacts (Max) 10 A 15 A 20 A
Supply   voltage (1) 9 ÷ 31 Vdc
Current   absorbed when idling 7,5 mA (Typical value)
Operating   temperature from – 15 to + 71°C
Degree   of protection IP 68
Switch-on   delay 5 sec
Switch-off   delay 20 sec
Casing   material Nylon
Dimensions   W x H x D – inch 2”31/32 x 3″ 1/4   x 1”1/2
Weight –   lb 0.91 lb
Back To Top