SF Mini Extra Wide Windlass
$5,257.45 – $6,062.10
Description
- The SF Mini Extra Wide Windlass is just like having an extra crew member tending the anchor for you raising and lowering your anchor quickly, safely and effortlessly.
- There is no need to tie off your anchor rope, no racing down to the bow to drop or raise the anchor.
- No tangled rope and chain in the anchor well, no strained back or frustrated amateur crew, no rushing around the boat to move your mooring.
- Simply drive the boat to where you want to fish, push a button and the anchor is lowered quickly without fuss or bother, and it is even automatically secured.
- You can lower and retrieve your anchor rope using our Australian made electric anchor winches at a rate between 70 and 90 feet per minute!
- The revolutionary Stress-Free Marine electric drum anchor winch is available in a range of capacities, and there’s one designed just to fit into your boat.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | 17 × 17 × 11 in |
| Model | Mini Extra Wide, Mini Extra Wide Free Fall |
| Wattage | 500W |
| Voltage | 12V |
Specifications
| NG Series Mini 500 – Free Fall |
| Suitable for boats from 4 – 6 meters |
| Fits neatly into the anchor well |
| 500-watt motor |
| The motor can be mounted at 30, 45 and 90 degrees to suit the configuration of the anchor well |
| Constructed from 316 marine grade stainless steel |
| Maximum lifting capacity 195 kilos (when the drum diameter is small) |
| Holding capacity at anchor is 1800 kilos |
| Rated to 80 amps |
| Normal running the Stress-Free will use 25 – 30 amps and under load up to 55 amps |
| To protect the motor, the circuit breaker will trip out if there is a power overload (for example the anchor is stuck on the bottom) |
| Recommend dual batteries with the battery switch on BOTH |
| Can be deck mounted |
| The gearbox mounting holes in the mounting bracket allow the motor and drive to be installed at 4 angles to suit different anchor well configurations. |
| Another 8 adjustment angles are available at 30º and 45º from each of the basic 4 mounting holes. |
| NB: (the motor cannot be mounted in the horizontal position to face the baseplate). |
| NB: The amount of chain can be lengthened or shortened to meet individual needs. |
| In these situations, the amount of rope must be tailored to ensure there is a maintained clearance between the chain and the baseplate. |
